Well got boat launched today and got her back to my mooring but being single handed i pulled the canopy up on my own, heard a crack and one of the plastic fitting that run up sliders by the gunwales with a wing nut on twisted and snapped..doh
Tried numerous sites and found something similar (link below) but with a bolt but can sort that out but only in 1". Assume thats the pole/slider diameter, mines around 3/4". Anyone know a source for these in assume 3/4" ?
Knighty, I damaged the canopy on my Norman 20 when towing her back from the Broads in windy conditions. I took it to J&H trimmings who are based at the Marina at Greensforge is on the Staffs & Worcs canal off the A449 not far from Stourbridge. They repaired it and supplied extra bits there and then for less than a fiver. I cannot fault them
Resurrecting an old thread to ask would a new Coverit canopy and frame fit to existing dot and cord fittings does anyone know ?
My canopy still has loads of life as only 4-5 years old and sound apart from odd dribble from a few seams in heavy rain, but on the odd day you are caught in the rain the front is quite low above the helm seat and thinking maybe for next season getting a new canopy and higher framework. It's that i don't really want to be relocating dot studs as there are some unused and holes filled from previous canopies as it is. Made to measure is the way but nobody around me (South Worc's) so don't think is possible.
Canopy fitting
Posted - 18 Apr 2011 : 15:50:08
the front is quite low above the helm seat and thinking maybe for next season getting a new canopy and higher framework.