| T O P I C R E V I E W |
| trickyblue |
Posted - 24 Apr 2018 : 08:45:13
Well, I finally took the plunge after years of "what if?"
I collected my Norman 20 yesterday from the Norfolk Broads and towed it home to where I live (literally a 15 minute walk from where the Norman's were built!)
Although tolled for the season on the Broads, I don't think she will see the water again this year, the aim is to work on her this year and then take her back to the Broads. Loads of questions at the moment. Hopefully folks on here will be able to help. |
| 15 L A T E S T R E P L I E S (Newest First) |
| trickyblue |
Posted - 14 Aug 2018 : 20:32:39
Yes, sorry, should have shrunk it before uploading!
Sorry, feel free to remove. |
| IanM |
Posted - 14 Aug 2018 : 20:26:27
Here ya go. Your image is, um, quite large!
 |
| trickyblue |
Posted - 14 Aug 2018 : 19:29:46
https://imgur.com/a/aDIUCFx " target="_blank">= https://imgur.com/a/aDIUCFx
Not quite right but the link is clickable, showing the finished consumer unit in the toilet compartment. |
| trevork |
Posted - 14 Aug 2018 : 00:17:37
You either simply email me the pictures or follow the rather covoluted way of posting via here which requires you to have them posted on the web already on the likes of flickr. |
| trickyblue |
Posted - 13 Aug 2018 : 16:59:49
The work continues...240v electrics completed, in accordance with the BSC regulations. Arctic cable, crimped ferrules on all the connections and clipped up conduit etc. Inlet is in the cockpit on the locker side under helm seat. Consumer unit mounted on bulkhead in toilet compartment. One single socket mounted directly above this and one double in the cabin. Had planned to have another weatherproof socket at the rear of the cockpit but as there are only 2 knockouts in the bottom of the consumer unit I decided against that. Cant for the life of me work out how to post pics otherwise I would. |
| trickyblue |
Posted - 28 Jul 2018 : 23:21:45
Thanks...those are the same diagrams Ive been looking at.
Definitely no plug/receptacle as shown.
Ill have another look tomorrow and try and trace wires from rectifier.
Thanks for your input, it is appreciated  |
| df |
Posted - 28 Jul 2018 : 13:53:25
Is this any help?
Also see if you can find the regulator (8) under the hood and follow the wires to the plug (6+7)
NBAS--The communal colostomy bag of the boating community.
 Visit leomagill.co.uk |
| trickyblue |
Posted - 28 Jul 2018 : 13:24:56
Its a Honda 4 stroke BF 9.9hp, manual start only so no battery cables.
Everything I've read including the owners manual states that it has a 6 amp charging system fitted that can just be "plugged into" but I cant see any sign of it! |
| df |
Posted - 28 Jul 2018 : 10:37:39
What engine is it? Most charge through the main battery cables with the charging regulator wiring under the motor cowling.
NBAS--The communal colostomy bag of the boating community.
Visit leomagill.co.uk |
| trickyblue |
Posted - 28 Jul 2018 : 09:57:17
One step forward...2 steps back!
I was attempting to finalise the 12 volt wiring yesterday and all that was left was to connect the charging output from the motor to the batteries.
I can not see the charging plug/socket anywhere on the engine.
I've downloaded an owners manual and read loads of stuff on various forums but there doesn't appear to be anything like that on my engine. |
| trevork |
Posted - 25 Jul 2018 : 00:59:53
Good to hear of your progress, keep us informed, we love to see stuff like this. |
| trickyblue |
Posted - 24 Jul 2018 : 15:26:29
Ok so I have fitted a water tank complete with gauge sender, opposite the helm under the crew seat and the Jabsco pump and strainer sit there too. I've added a deck filler and breather/overflow vent through a skin fitting and it seems to work pretty effectively.
The water level gauge is fitted above the toilet compartment door, and I have fitted a basic tap to replace the old push pump type that was there previously.
Boat now seems to be staying dry after I have resealed the front windows, probably wont last...but I will keep the sealer in the boat lol.
Still loads to do! |
| trickyblue |
Posted - 25 May 2018 : 15:59:01
Ha, speed isn't an option...3, 4 and rarely 6 mph allowed on the Broads, plenty fast enough when you're enjoying the wildlife and scenery. Now that I've discovered the old Honda 9.9 outboard although not having electric start will give 6 amps charging output I will be sticking with that motor for now. I had planned on using the Tohatsu 15 from my dory but at least I wont have to shell out for another remote unit now  |
| cliveshep |
Posted - 24 May 2018 : 15:57:55
The 20's are nose down yes, the alternative is two tanks, one each side but that will take up storage space that is limited anyway!
I have done it a couple of times - the inboard/sterndrive option does trim the boat nicely plus if you get off the canals Normans can be driven quite quickly!
Finally living the dream!
|
| IanM |
Posted - 23 May 2018 : 19:51:17
Never pass someone else's toilet without using it.
|
