| T O P I C R E V I E W |
| fred99 |
Posted - 16 Jun 2014 : 19:41:29
What length throttle and gear shift cables should a standard N20 need please? |
| 7 L A T E S T R E P L I E S (Newest First) |
| fred99 |
Posted - 20 Jun 2014 : 07:51:15
Very helpful, thanks. |
| Wayfoot |
Posted - 19 Jun 2014 : 12:30:01
There are numerous websites that show diagrams on how to measure up correctly, take a look at this one.
http://www.go2marine.com/productcenters/teleflex/teleflexCableMeasurements.shtml
Good Luck |
| fred99 |
Posted - 18 Jun 2014 : 17:34:16
Thanks df.
Ah I didn't realise that. I assumed they all came out of the factory with a standard set up.
So I need to measure from the control box along the inside of the boat and then across the back to the engine. How much extra should I add to allow the engine to move side to side?
|
| df |
Posted - 18 Jun 2014 : 07:42:50
There is no original place, a lot of normans were sold as bare shells, some with kit fitout, some as finished, all with different or no engine options.
You need a tape measure.
NBAS--The communal colostomy bag of the boating community.
Visit leomagill.co.uk |
| fred99 |
Posted - 18 Jun 2014 : 07:28:17
The remote is in its original place if that helps. |
| tigtog |
Posted - 17 Jun 2014 : 22:26:11
yep DF spot on no boat is the same. |
| df |
Posted - 17 Jun 2014 : 18:25:58
Depends where the remote is mounted, no such thing as standard unfortunately.
NBAS--The communal colostomy bag of the boating community.
Visit leomagill.co.uk |
