| T O P I C R E V I E W |
| nebula |
Posted - 19 Apr 2014 : 18:55:16
Hello
I am looking to replace the rubber fendering that runs around the top of the side of the boat. The fendering is a rubber D profile from Wilks but I am looking to replace with something that looks better. When i replaced the fendering over 10 years ago I found that as you screwed it in to the boat it 'pinched' so you did not end up with a completely straight profile.
Anyone got any suggestions? I have looked at Wilks aluminium profile with pvc insert but not sure it is flexible enough to run all the way around the boat.
Ta
John |
| 3 L A T E S T R E P L I E S (Newest First) |
| nebula |
Posted - 20 Apr 2014 : 08:25:15
quote:
Originally posted by Sonny
We have just done the strip around the gunalls on our 23 with white plastic with a blue filler and it was easy to fit and I recon it looks good.it cost about £140 from an ebay company called walker rubber plastics ltd the end caps were about £10 each
Any chance of a photo? |
| IanM |
Posted - 19 Apr 2014 : 23:21:33
Seals Direct. Mention this site and you should get a small discount.
http://www.sealsdirect.co.uk/shopping.asp?intDepartmentId=5
|
| Sonny |
Posted - 19 Apr 2014 : 20:55:26
We have just done the strip around the gunalls on our 23 with white plastic with a blue filler and it was easy to fit and I recon it looks good.it cost about £140 from an ebay company called walker rubber plastics ltd the end caps were about £10 each |
