| T O P I C R E V I E W |
| BoatForMyPotplants |
Posted - 30 Sep 2012 : 07:07:27
...I need more practice with this boating business, and I need more confidence.
I've put the reasons why on my blog www.aboatformypotplants.blogspot.com
Neil |
| 6 L A T E S T R E P L I E S (Newest First) |
| tigtog |
Posted - 01 Oct 2012 : 21:58:51
may not be your problem, i filled my plastic petrol tank nearly to the top, the engine was fine when revving, but lumpy and stalling at idle , once the tank was a bit lower on fuel engine ran ok.
does sound like your idle needs picking up a bit |
| Knighty |
Posted - 01 Oct 2012 : 13:31:52
My brand new Mariner last year had same the same issue, a tweak from the mechanic at the marina where i bought from and now running sweet. |
| adi-n-chez |
Posted - 30 Sep 2012 : 21:54:12
Also may be Mixture related - When we fitted the Honda , it was fine until hot , then would be lumpy on tickover cutting out - Checked mixture / air screw - Too rich !
Adi
Sewer Tubes ? I'd rather have a D**ncr*ft (Only Kidding) |
| cliveshep |
Posted - 30 Sep 2012 : 20:46:19
Sounds like it's just ticking over a few rpm too slowly. Wasn't this the lump you were more or less given? Why not ask them then?
But I'd say turn up tickover a bit.
The cost of boating is insignificant compared to costs of a young wife and two teenage kids! |
| BoatForMyPotplants |
Posted - 30 Sep 2012 : 20:26:06
Thanks Adi
Yes, I did do that before we set off, and there was plenty of fuel in the tank. It seemed to cut out when I went from forward to reverse at low revs. Maybe I hadn't revved up the engine enough before setting off. Being inexperienced I just don't know. Nearly wanted to give up yesterday, but I will keep trying. Thanks for your suggestion - it does help with the confidence.
Neil |
| adi-n-chez |
Posted - 30 Sep 2012 : 19:08:35
Neil
Its all part of boating !!
However - As you are very new to it !! & seem to have problems with the outboard cutting out - A quick question....
Have you unscrewed the vent on the outboard tank ???????
This may be your problem !
Adi
Sewer Tubes ? I'd rather have a D**ncr*ft (Only Kidding) |
