|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| Dangleberrys |
Posted - 18 May 2012 : 08:34:08
Hello.
I have used the forum to hopefully order the right rubber strips from seals direct so I can take the two side sliding windows out and renew.
I am going with the flat flocked seal.
My questions are do the flocked seal go all around the window for the two to slide. Are her any other seals I need for the renew. And as mine ATM do not open because someone has sealed up the middle shut. What goes in the middle of the window where the two windows meet(top to bottom) so it is a tight seal?
Thanks in advance |
| 1 L A T E S T R E P L I E S (Newest First) |
| Lester Mayo |
Posted - 18 May 2012 : 09:07:16
The u shape seal goes all round the sliding window. To do this you will have to remove the frame from the boat and split the frame. make sure that water can escape through the drain holes by cutting into the seal to allow this.
The fixed window pane has a rubber seal holding the glass.
The middle of the window where the two panes overlap has a p shape seal, a bit like a wiper blade to form the seal.
do a search on the site for windows, theres loads of info on this subject.
Don't take life too serious, it's not permanent |
|
|
|
© N.B.A.S. 2020 |
 |
|
|
