Full Screen | Home | My Files | Profile | Register | Active Topics | Members | Private Messages | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Norman Boats
 Well My Norman has ...............?
 Norman 20 Ali side windows		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Dangleberrys

United Kingdom
1 Posts
Posted - 18 May 2012 :  08:34:08  Show Profile Send Dangleberrys a Private Message  Reply with Quote
Hello.
I have used the forum to hopefully order the right rubber strips from seals direct so I can take the two side sliding windows out and renew.
I am going with the flat flocked seal.
My questions are do the flocked seal go all around the window for the two to slide. Are her any other seals I need for the renew. And as mine ATM do not open because someone has sealed up the middle shut. What goes in the middle of the window where the two windows meet(top to bottom) so it is a tight seal?

Thanks in advance

Lester Mayo

United Kingdom
289 Posts
Posted - 18 May 2012 :  09:07:16  Show Profile Send Lester Mayo a Private Message  Reply with Quote
The u shape seal goes all round the sliding window. To do this you will have to remove the frame from the boat and split the frame. make sure that water can escape through the drain holes by cutting into the seal to allow this.
The fixed window pane has a rubber seal holding the glass.
The middle of the window where the two panes overlap has a p shape seal, a bit like a wiper blade to form the seal.

do a search on the site for windows, theres loads of info on this subject.






Don't take life too serious, it's not permanent
Edited by - Lester Mayo on 18 May 2012 09:15:16
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
© N.B.A.S. 2020 Go To Top Of Page
Snitz Forums 2000