| T O P I C R E V I E W |
| coxie100 |
Posted - 28 Feb 2012 : 15:18:40
Hi we are trying to find a supplier of a windshield for our callumcraft 22.
We've found one on the net but it seems a little expensive and then they want £150 carrige fee.
Were in the nottingham area so any ideas would appreciated.
Ruth |
| 9 L A T E S T R E P L I E S (Newest First) |
| adi-n-chez |
Posted - 02 Mar 2012 : 22:09:43
quote:
Originally posted by Sonny
hi Adi
Can I ask where you got the seal for the bottom of the screen from as we have looked through the seals direct catalog but nothing seems to match the profile.
Sonny - Seal was from our yard , they normally stock it & its not expensive (Don't know where they get it from !)
They do sell stuff via internet - may be worth a call , LR Harris - 0116 269 2135
Just mention the bottom seal for a Norman 22 screen , should be able to help
Not checked seals direct - for the amount needed we just bought it from the yard (Plus they gave invaluable help in fitting !)
Adi
Sewer Tubes ? I'd rather have a D**ncr*ft (Only Kidding) |
| coxie100 |
Posted - 01 Mar 2012 : 20:14:26
Thanks Adi good to hear from someone who's actually fitted one, definatly going to try it not paying that sort of money out, will go take a template tomorrow and find someone local to cut it, will let you know how we get on.
Ruth |
| Sonny |
Posted - 01 Mar 2012 : 12:50:11
hi Adi
Can I ask where you got the seal for the bottom of the screen from as we have looked through the seals direct catalog but nothing seems to match the profile. |
| adi-n-chez |
Posted - 29 Feb 2012 : 22:43:25
A little Expensive !!!!
I should say so !
The Callum Screen is the same as the Norman 22 I think.
Our 22 was bought (9yrs ago) & came with a spare screen which I fitted last yr (Not the easiest job but ok with 3 pairs of hands to hold whilst fixing)
The original owner had 2 cut with a local company & If I recall the spare had the bend in it when we bought the boat.
8 years later - it was flat ! , but bent into the ally profile trim easily. New seal at the bottom was fitted & it all bolted into place with a little grunt!
We did snap two of the 4 mounts on the first attempt (40yr old monkey metal ! - A local engineer machined me new ones for £20)
I'm not sure but I think the 2x screens cost the guy we bought the boat off around £60 , even with mass inflation £325 is ridiculous!
If you have the original then use as a template & get a new one cut. If you require new mounts I may be able to get some made
Adi
Sewer Tubes ? I'd rather have a D**ncr*ft (Only Kidding) |
| coxie100 |
Posted - 29 Feb 2012 : 12:26:50
Yes was we thought about that but they still want £325 for the screen , think it's a little expensive it's only perspex, going to try some perspex companies first quote:
Originally posted by Deano
Can you not d.rive over and pick. it up, it's less than £150 for the petrol?
Dean - Boating on te Grea:-) t Ouse.
Freeman 30 "Silver Gem"
See the photos http://www.flickr.com/photos/54758027@N00/
|
| Deano |
Posted - 28 Feb 2012 : 22:24:30
Can you not drive over and pick it up, it's less than £150 for the petrol?
Dean - Boating on the Great Ouse.
Freeman 30 "Silver Gem"
See the photos http://www.flickr.com/photos/54758027@N00/ |
| coxie100 |
Posted - 28 Feb 2012 : 20:03:36
Many thanks but thats the one we've seen online and want £150 postage.will have to keep looking.
aquote:
Originally posted by sm0129
Try-
http://www.littleportboathaven.co.uk/boat%20windscreens.htm
|
| sm0129 |
Posted - 28 Feb 2012 : 19:00:26
Try-
http://www.littleportboathaven.co.uk/boat%20windscreens.htm |
| coxie100 |
Posted - 28 Feb 2012 : 15:21:40
Sorry husband just told me it's a callumcraft 23 Opps  |
