| T O P I C R E V I E W |
| Stan the Man |
Posted - 13 Oct 2011 : 07:21:12
I've recently acquired a Norman 27, "Hunky 'B'" and am currently carrying out various jobs. One which I plan to do is to remove each of the windows and replace the rubber seals which are life expired. It looks are though they are attached through the cabin sides into aluminium trip channel inside the cabin - is this the case. When refiiting, I'll be resealing the refurbished frames using the same sealant used on caravan windows.
Any information and details of the rubber profiles I'll need would be much appreciated. |
| 4 L A T E S T R E P L I E S (Newest First) |
| stratford4528 |
Posted - 17 Oct 2011 : 17:46:51
I am fully overhauling the windows on my 32 I tried different samples but the problem I have is the channels are 9mm with a lip at the top. So the best rubber I find is the flock lined flat, but it has to be trimmed both sides to make it fit. Also my windows are fixed with pop rivets which don't seem very good to me. So I have bought 4mm stainless socket head countersink bolts and dome head nuts and bolted them right through. These bolts can also be used for joining the 2 halves of window by re tapping where the brass screws would not come out |
| Stan the Man |
Posted - 17 Oct 2011 : 07:54:49
Stratford 4528 and trevork
Many thanks for the information |
| trevork |
Posted - 13 Oct 2011 : 22:07:43
They will also send you some samples if you give them an idea what it is you are trying todo. Also, mention us and you should get a discount! |
| stratford4528 |
Posted - 13 Oct 2011 : 19:31:22
http://www.sealsdirect.co.uk/ ask them to send a brochure. You wont find the right seal but something close that you can adapt |
