Full Screen | Home | My Files | Profile | Register | Active Topics | Members | Private Messages | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Norman Boats
 Well My Norman has ...............?
 Formica Finish - Colour
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Stan the Man

United Kingdom
134 Posts

Posted - 18 Oct 2011 :  07:40:17  Show Profile Send Stan the Man a Private Message  Reply with Quote
I suspect most of the Normans built around the late 70s/early 80s were fitted out with the same formica finish on the bulkheads/cupboard carcases, etc. I do seem to remember this as Teak from my memories of that era, but this is now pretty rare and new edging, whilst still available, requires more than just a trip down the local DIY. So that I do not end up with a 50 metre coil of the wrong colour, I would be most grateful if anyone knows whether it is Teak or not.

Thanks in anticipation.

Lester Mayo

United Kingdom
289 Posts

Posted - 18 Oct 2011 :  18:10:29  Show Profile Send Lester Mayo a Private Message  Reply with Quote
Formica? The wood finish was sapele still prety much available as timber but scarce in ext plywood form above 12mm.
Go to Top of Page

Stan the Man

United Kingdom
134 Posts

Posted - 19 Oct 2011 :  07:01:34  Show Profile Send Stan the Man a Private Message  Reply with Quote
Lester Mayo

All the doors, bulkheads and internal walls are indeed finished in formica with the "real" wood reserved for cabinet shelves and backs and the various trims.

I'll take a photo today and post it on the offchance that anyone recognises the finish.

Regards, Stan Owen
Go to Top of Page

Knighty

United Kingdom
654 Posts

Posted - 19 Oct 2011 :  21:34:15  Show Profile Send Knighty a Private Message  Reply with Quote
Some of my edging was split or missing, i ordered the iron on teak veneer edging from eBay where you can order small amounts if you search. I ended up gluing it on and where it needed it i stripped the whole edges off and a light sand before gluing on and with a couple of coats of satin varnish didn't look too bad.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
© N.B.A.S. 2020 Go To Top Of Page
Snitz Forums 2000