|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| white fox |
Posted - 05 Jun 2018 : 17:06:37
Hi. Have not been on forum for some time, I have just removed the starter motor on my Norman 29 wide beam, fitted with the old six cylinder sabre engine i believe 80hp. I need starter motor rebuilding or a replacement if someone has one hanging about. |
| 3 L A T E S T R E P L I E S (Newest First) |
| white fox |
Posted - 07 Jun 2018 : 18:38:49
Thanks for your comments, its true mension a boat engine and the price doubles, so went down the ford 6 cylinder tractor ie fordson and up come Millward elecrics ltd of Burntwood Staffs a new starter motor the same AS MINE FOR £125.00 delivered to my door next day. |
| df |
Posted - 06 Jun 2018 : 08:14:34
Or check for local motor rewinds or auto electrical place as it's always cheaper without a piccie of a boat on the box.
If it's a lucas starter there's usually a black cover on the solenoid you can buy separately with the contacts included, these are the bits that generally burn out and fairly easy to fit, the motor itself itself is often fine, once the contacts burn it gives all the signs of a knackered starter.
NBAS--The communal colostomy bag of the boating community.
 Visit leomagill.co.uk |
| trevork |
Posted - 06 Jun 2018 : 00:28:52
If you can't find one, Lancing would not be the worst place to start looking!
https://www.lancingmarine.com/
|
|
|
|
© N.B.A.S. 2020 |
 |
|
|
