Full Screen | Home | My Files | Profile | Register | Active Topics | Members | Private Messages | Search | FAQ
 All Forums
 Norman Boats
 Well My Norman has ...............?
 ballast on a 27

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

  Click here to attach a photo to your post
 
   

T O P I C    R E V I E W
philihun Posted - 05 Sep 2016 : 19:02:39
Evening folks, question on how much ballast to put in the bow compartments of Jacob my center cockpit 27. I have just done 2 weeks trouble free cruising down to Bardney via the tent from Keadby to Torksey etc. The boat is easy to steer and keep a straight line but a couple of folk have commented it is too bows heavy whilst on the move. Have i overdone the ballast, and will it effect my fuel consumption etc. BTW i have sandbags and leisure batteries up front. Cheers in advance Philihun.

pr hunt
4   L A T E S T    R E P L I E S    (Newest First)
cliveshep Posted - 07 Sep 2016 : 13:27:53
On a 27ft boat I suspect you'll need a lot more weight than 2 batteries to have any effect.

4 or 5 bags of stones might have an effect, make that 8 - 10 bags, remembering Nanny-State insists they are max 25kg.


Finally living the dream!
philihun Posted - 06 Sep 2016 : 10:31:23
Thanks for that. I will transfer the batteries to the rear and adjust accordingly.

pr hunt
cliveshep Posted - 06 Sep 2016 : 01:16:36
At displacement speeds we heavy is steady, all you have to worry about is inertia - getting it going or stopping it. So why not shift some of the weight aft to trim the boat?

Plastic outboard boats are notoriously light and the wind or current has them as a plaything - ballast prevents a lot of that and improves steering control. It also increases response-time to the helm of course but you can allow for that whereas allowing for gusts of wind you cannot allow for.

Move some ballast or add more at the stern to trim the boat. One bag of stones (don't use sand because if a bag breaks it makes an awful mess) won't have much effect. You'd be amazed at how much ballast you can actually add to your bilges.

As a guide, a little IP16 hull (admitedly this needs ballast for stability) takes anything up to half a metric tonne. I used to concrete steel shot into those! As it's name suggests, and IP16 (Island Plastics) was 16 feet (4.877m)long and round bilge. 1/2 tonnne trimmed one down about 6 inches (15cm) so not in danger of sinking.

Normans are always "down-at-the-nose" visually, a design feature (error?) that makes them look as though they will nose-dive at any moment so visually they always look better if you can push the stern down so adding some ballast to both ends can improve how they "sit".

If you want to plane them of course you don't want too much weight aft but you can't do that on the Trent without men in big hats yelling at you!


Finally living the dream!
df Posted - 05 Sep 2016 : 20:08:02
The only way to find out is to remove some and try it, if it still handles ok it's fine.



NBAS--The communal colostomy bag of the boating community.
Visit leomagill.co.uk

© N.B.A.S. 2020 Go To Top Of Page
Snitz Forums 2000