| T O P I C R E V I E W |
| Canveysteve |
Posted - 13 Aug 2016 : 19:09:34
Hiya can anyone tell me how the glass fits in the fraims as mine have been striped by previos owner will need seals ect and metel joining tabs
Where can. I sorce these please and if poss what ones
Thanks to all
Steve |
| 4 L A T E S T R E P L I E S (Newest First) |
| Canveysteve |
Posted - 19 Aug 2016 : 06:40:55
The cornes i think ate steel by the state of1 that is left
Wondering if id get away with L brackets bent to the corect shap but on tbe outside of the fraim |
| cliveshep |
Posted - 19 Aug 2016 : 00:48:55
I do recall that the corners are fitted with small bits of bent flat ali inside the extrusions and secured by small self-tap screws. That keeps the frame together.
The seals you can get from Seals Direct I believe although I also believe Fitvit managed to source some - she has done the same operation on her boat and posted about it a few weeks back.
Finally living the dream!
|
| Canveysteve |
Posted - 18 Aug 2016 : 18:57:27
Chears mike mine are all striped but think corner bits are missing |
| mike |
Posted - 17 Aug 2016 : 15:52:02
As far as I am aware the metal frames are in 2 parts and the glass fits between them in weather seals, the frame is then put back together with rivets (use screw rivets) and then refitted to the boat again with weather seals.
I am not sure of the attachments, either selftappers or bolts.
Somebody on here will have all the details
Mike
|
