| T O P I C R E V I E W |
| Florian |
Posted - 25 Feb 2015 : 23:02:36
Hello,
Do I make a 'v' shaped panel to insert into the space in the fore peak of the Norman 23 (to make the double bed) or is it hiding somewhere? I'll make a cushion to fit into the space too - but wondered what do my friends in the forum do? Many Thanks, Florian
florian |
| 4 L A T E S T R E P L I E S (Newest First) |
| Knighty |
Posted - 28 Feb 2015 : 08:15:13
On my 20 I made a V section, as space was a premium on a 20 I used timber think about 150mm wide and 20mm thick and quite a few door type brass hinges and it all folded up and hid in the bow locker. |
| Florian |
Posted - 26 Feb 2015 : 23:18:23
Thankyou to you both - I have looked in the lockers but nothing so far but will investigate again.
Best Wishes,
Florian
florian |
| Steveanddeb |
Posted - 26 Feb 2015 : 07:20:07
When we bought our 24 we found the inserts in the storage under the V berth. Also check the storage under the seats  |
| trevork |
Posted - 25 Feb 2015 : 23:17:50
There should be a wooden insert. Have you looked under the cushions??
There should also be a couple of loose cushions to fill the formed gap! |
