Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
consumedbynature
Posted - 09 Nov 2012 : 09:04:34 Hi all.
My Shetland Black Prince has a large bulkhead at the bow under the v berth and currently has a 120ltr plastimo triangular shaped flexible water tank. This has gone brittle and has a small leak. The tank is lost under there as there is enough room for a much larger tank. My problems is that the bulk head is accessed by three small inspection hatches covered by locker covers. I can just about squeeze my head and shoulder through one of these and just about fitted the plastimo tank back through after cleaning it.
I can't cut a large hole at the top of the bulkhead as it is structural and covered in gel coat.
Does anyone know of any solution I could use to obtain a decent sized tank under there? Are there any good flexible tanks out there or are there ways a stainless steel tank could be fabricated in sections?
As ever your help is appreciated
Regards
Billy
Shetland Black Prince -Fizzy - Worcestershire Avon (Formerly owned a Norman 20)
